ARRAY_EXISTS
描述
使用一个可选 lambda 表达式作为输入参数，对其他的输入 ARRAY 参数的内部数据做对应表达式计算。当计算返回非 0 时，返回 1；否则返回 0。 在 lambda 表达式中输入的参数为 1 个或多个，必须和后面的输入 array 列数量一致。在 lambda 中可以执行合法的标量函数，不支持聚合函数等。
在没有使用 lambda 作为参数时，array1 作为计算结果。
语法
ARRAY_EXISTS([ <lambda>, ] <arr1> [, <arr2> , ...] )参数
| Parameter | Description |
|---|---|
<lambda> | lambda 表达式，可以执行合法的标量函数，不支持聚合函数等 |
<arr1> | 需要计算的数组 arr1 |
<arr2> | 需要计算的数组 arr2 |
返回值
返回使用表达式计算后的数组，特殊情况：
- 如果数组里面包含 NULL 或者本身为 NULL，则返回 NULL
举例
CREATE TABLE array_test2 (
id INT,
c_array1 ARRAY<INT>,
c_array2 ARRAY<INT>
)
duplicate key (id)
distributed by hash(id) buckets 1
properties(
'replication_num' = '1'
);
INSERT INTO array_test2 VALUES
(1, [1, 2, 3, 4, 5], [10, 20, -40, 80, -100]),
(2, [6, 7, 8], [10, 12, 13]),
(3, [1], [-100]),
(4, NULL, NULL);
select *, array_exists(x->x>1,[1,2,3]) from array_test2 order by id;+------+-----------------+-------------------------+-----------------------------------------------+
| id | c_array1 | c_array2 | array_exists([x] -> x(0) > 1, ARRAY(1, 2, 3)) |
+------+-----------------+-------------------------+-----------------------------------------------+
| 1 | [1, 2, 3, 4, 5] | [10, 20, -40, 80, -100] | [0, 1, 1] |
| 2 | [6, 7, 8] | [10, 12, 13] | [0, 1, 1] |
| 3 | [1] | [-100] | [0, 1, 1] |
| 4 | NULL | NULL | [0, 1, 1] |
+------+-----------------+-------------------------+-----------------------------------------------+select c_array1, c_array2, array_exists(x->x%2=0,[1,2,3]) from array_test2 order by id;+-----------------+-------------------------+---------------------------------------------------+
| c_array1 | c_array2 | array_exists([x] -> x(0) % 2 = 0, ARRAY(1, 2, 3)) |
+-----------------+-------------------------+---------------------------------------------------+
| [1, 2, 3, 4, 5] | [10, 20, -40, 80, -100] | [0, 1, 0] |
| [6, 7, 8] | [10, 12, 13] | [0, 1, 0] |
| [1] | [-100] | [0, 1, 0] |
| NULL | NULL | [0, 1, 0] |
+-----------------+-------------------------+---------------------------------------------------+select c_array1, c_array2, array_exists(x->abs(x)-1,[1,2,3]) from array_test2 order by id;+-----------------+-------------------------+-------------------------------------------------------------------------------+
| c_array1 | c_array2 | array_exists(cast(array_map(x -> (abs(x) - 1), [1, 2, 3]) as ARRAY<BOOLEAN>)) |
+-----------------+-------------------------+-------------------------------------------------------------------------------+
| [1, 2, 3, 4, 5] | [10, 20, -40, 80, -100] | [0, 1, 1] |
| [6, 7, 8] | [10, 12, 13] | [0, 1, 1] |
| [1] | [-100] | [0, 1, 1] |
| NULL | NULL | [0, 1, 1] |
+-----------------+-------------------------+-------------------------------------------------------------------------------+select c_array1, c_array2, array_exists((x,y)->x>y,c_array1,c_array2) from array_test2 order by id;+-----------------+-------------------------+-------------------------------------------------------------+
| c_array1 | c_array2 | array_exists([x, y] -> x(0) > y(1), `c_array1`, `c_array2`) |
+-----------------+-------------------------+-------------------------------------------------------------+
| [1, 2, 3, 4, 5] | [10, 20, -40, 80, -100] | [0, 0, 1, 0, 1] |
| [6, 7, 8] | [10, 12, 13] | [0, 0, 0] |
| [1] | [-100] | [1] |
| NULL | NULL | NULL |
+-----------------+-------------------------+-------------------------------------------------------------+select *, array_exists(c_array1) from array_test2 order by id;+------+-----------------+-------------------------+--------------------------+
| id | c_array1 | c_array2 | array_exists(`c_array1`) |
+------+-----------------+-------------------------+--------------------------+
| 1 | [1, 2, 3, 0, 5] | [10, 20, -40, 80, -100] | [1, 1, 1, 0, 1] |
| 2 | [6, 7, 8] | [10, 12, 13] | [1, 1, 1] |
| 3 | [1] | [-100] | [1] |
| 4 | NULL | NULL | NULL |
+------+-----------------+-------------------------+--------------------------+